SUMMARY: SF V100 won't power on

Dear all,

The problem is mostly a faulty power supply, I still have this to be
confirmed, thanks to Bhaskar G for pointing out some facts about
LOM that I didn't know before that helped isolating the issue. Thanks
also to Anthony D'Atri.

I would like to mention as well the harassment from a subscriber
so called Hicheal Morton (hike) who I believe has mentioned by many
others in the list for his occasional abuse.

Regards,
Tamer

Tamer Embaby wrote:
> Hi all,
>
> I have a SunFire V100 machine that stopped today and refuses to
> power on using:
>
> - Power switch
> - poweron command from LOM
>
> The server doesn't respond or change state, it's just does
> nothing.  When the server went down today I found that the
> fault led is blinking, it doesn't blink now but I believe
> I should mention this.
>
> Any help is appreciated.
>
> Here is the output:
> lom>
>
>
> LOMlite starting up.
>
> CPU type: H8/3437S, mode 3
> Ram-test: 2048 bytes OK
> Initialising i2c bus: OK
> Searching for EEPROMs: 50(cfg)
> I2c eeprom @50: OK
> i2c bus speed code 01... OK
> Probing for lm80s: none
> Probing for lm75s: 48
> Initialising lm75 @48: OK
> System functions: PSUs fans breakers rails gpio temps host CLI ebus clock
> Power restored
>
> LOMlite console
> lom>
> LOM event: +0h0m0s LOM booted
> lom>console
> System in standby
> lom>poweron
> lom>
>
> Regards,
> Tamer
> _______________________________________________
> sunmanagers mailing list
> sunmanagers@sunmanagers.org
> http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers