SUMMARY: sys-unconfig in solaris 10

From: Ray Stell <stellr_at_cns.vt.edu>
Date: Fri Mar 09 2007 - 20:22:01 EST
I asked why sys-unconfig did not cause sysidtool to run after the reboot
on an x4200 running solaris 10.  I didn't get an answer to this question.
I don't know if that means it does work for others and I'm just lucky
or if sys-unconfig is busted and nobody uses it anymore.

Micah DesJardins suggested a touch of /reconfigure and reboot as a method.
This did not cause sysidtool to fire up for me either.  

Richard Skelton asked me what /etc/.sysIDtool.state and /etc/.UNCONFIGURED
looked like wrt http://sysunconfig.net/unixtips/sysunconfig_sol8.txt
I changed them as suggested and that did not cause sysidtool to start.

There were two posts on various files to edit by hand to change the 
network config:

Micah:
------
/etc/hosts			change the ip and the name.
/etc/hostname.hme0		put in the new hostname, It may also be Ie0 it
                    		depends on your machine.  (mine is e1000g0)
/etc/defaultrouter 		new gateway
/etc/defaultdomain
/etc/nodename 			host name

Tom Zurita:
-----------
/etc/netmasks
/etc/ inet/ipnodes 		this is for IPv6
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
Received on Fri Mar 9 20:22:40 2007

This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:44:05 EST