Thanks for all the replies. Most replies recommended using prtdiag and looking at the pci device name. An LP10000-S for example would be a Sun card. I've found another method is to install the EMLXemlxu package. See tha output below. This utility can be used to select the Sun emlxs driver of the lpfc driver for the emulex card. Note - Sun branded emulex cards can only use the emlxs driver. Regards, Vic /opt/EMLXemlxu/bin/emlxdrv EMLXDRV Driver Management Utility, Version 1.00j COPYRIGHT (c) 2004-2005 Emulex. All rights reserved. Driver Alias Present Boot Sun Models ------------------------------------------------------------------------------- emlxs lpfs no no no LP8000S and LP9002S (SBUS) emlxs f800 no no no LP8000 and LP8000DC emlxs f900 no no no LP9002, LP9002C, LP9002DC, and LP9402DC emlxs f980 no no no LP9802 and LP9802DC emlxs fa00 yes no no LP10000, LP10000DC and LP10000ExDC emlxs fd00 no no no LP11000 and LP11002 emlxs fe00 no no no LPe11000 and LPe11002 emlxs f0a5 no no no 2G Blade Adapter (emlxs only) emlxs fc00 no no yes LP10000-S and LP10000DC-S emlxs fc20 no no yes LPe11000-S and LPe11002-S Available commands: ------------------------------------------------------------------------------- set_emlxs <Alias> - Sets emlxs driver to bind to the specified device(s) set_emlxs_sun - Sets emlxs driver to bind to all Sun devices set_emlxs_all - Sets emlxs driver to bind to all devices set_lpfc <Alias> - Sets lpfc driver to bind to the specified device(s) set_lpfc_nonsun - Sets lpfc driver to bind to all non-Sun devices clear_dev <Alias> - Clears driver binding to the specified device(s) clear_lpfc - Clears all lpfc driver bindings clear_emlxs - Clears all emlxs driver bindings clear_sun - Clears driver bindings to all Sun devices clear_nonsun - Clears driver bindings to all non-Sun devices clear_all - Clears driver bindings to all devices q - Exits this program. emlxdrv> ---------- Forwarded message ---------- From: Stoichitescu, Dragos, VF-RO <Dragos.Stoichitescu@vodafone.com> Date: Nov 30, 2006 4:22 PM Subject: RE: Sun branded Emulex HBA To: SunAdmin <sunsysadmin@gmail.com> Do a "prtdiag -v". If you get smth like : PCI 8 A 0 66 66 1,0 ok SUNW,emlxs-pci10df,fc00/fp (fp) LP10000-S then the "S" at the end of the card model tells you that you have a SUN branded HBA. Dragos Stoichitescu Unix System Administrator Vodafone Romania -----Original Message----- From: sunmanagers-bounces@sunmanagers.org [mailto:sunmanagers-bounces@sunmanagers.org] On Behalf Of SunAdmin Sent: Thursday, November 30, 2006 9:26 PM To: sunmanagers@sunmanagers.org Subject: Sun branded Emulex HBA Hello List, I have an LP10000 installed in a Sun 280r. How can I determine whether the card is an Emulex card or a Sun branded card and is there any difference between the two? Thanks, Vic _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Tue Dec 5 08:57:57 2006
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:44:03 EST