Sorry about wasting bandwidth Only the vts frame work was installed. Well at least you guys know that if you don't get anything in your System Map, you don't have all the vts components installed. It works now. Stupid me, I am still very new at this. -----Original Message----- From: sunmanagers-bounces@sunmanagers.org [mailto:sunmanagers-bounces@sunmanagers.org]On Behalf Of Al Saenz Sent: Monday, February 27, 2006 5:36 PM To: sunmanagers@sunmanagers.org Subject: SunVTS will not start tests Hi Managers, Just wondering if any of you had an problems running SunVTS for x86? I installed the x86 version, didn't see any errors. I started the application and it comes up just fine, using vtstty and sunvts. I try to start a test but all I get is this (G3-b-TEST)Testing completed: 0 pass(es), 0 error(s) press [ESC] to dismiss The elapse time starts at 1 second pauses then jumps to 4 seconds stops and goes to idle. Then the above message is displayed. The funny thing is, nothing is displayed in the system map, no memory, processor, network or anything (status and test group). I run sunvts all the time on SPARC, it is very simple to use, but never seen anything like this. Thanks for any tips _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Mon Feb 27 17:58:37 2006
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:56 EST