Summary: disk geometry

From: Chris Pelton <cpelton_at_fxcm.com>
Date: Thu Feb 23 2006 - 14:26:48 EST
found a good response earlier in this very list.  not quite the same
situation, as the disks are the same size, but the methods are what i
needed.

http://www.sunmanagers.org/pipermail/summaries/2005-February/006160.html


thanks to those who responded so quickly!

-chris

>>> Chris Pelton 2/23/2006 1:40 pm >>>
hi all,

is it possible to manually change what solaris sees for disk geometry?
i need to replace a mirrored disk in Sol8, DiskSuite 4.2.1 and would
prefer to change the geometry table if possible rather than manually
creating partitions of the same cylinder size. i recall doing this
before but can't locate the method used. 

thanks,
chris
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
Received on Thu Feb 23 14:27:22 2006

This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:56 EST