The easiest way to do it with the prtpicl command. prtpicl -v |grep disk :disk-write-fix disk-label (disk-label, 3d00000032) :devfs-path /packages/disk-label :binding-name disk-label :_class disk-label :name disk-label :bootpath /pci@1c,600000/scsi@2/disk@0,0:a :boot-device disk:a disk1:a :diag-device disk0:f :disk /pci@1c,600000/scsi@2/disk@0,0 :disk0 /pci@1c,600000/scsi@2/disk@0,0 :disk1 /pci@1c,600000/scsi@2/disk@1,0 :disk2 /pci@1c,600000/scsi@2/disk@2,0 :disk3 /pci@1c,600000/scsi@2/disk@3,0 :SlotType disk-slot disk (fru, 3d000006fe) :name disk :SlotType disk-slot disk (fru, 3d00000701) :name disk :SlotType disk-slot :SlotType disk-slot Thanks to Pascal Grostabussiat [pascal@azoria.com] for pointing this out! > _____________________________________________ > From: Cohen, Laurence > Sent: Wednesday, January 25, 2006 10:25 AM > To: sunmanagers@sunmanagers.org > Subject: Boot Disk? > > Is there an easy way to see which disk I am booting from without > having to take the system down to the OK prompt? If I type, eeprom > |grep boot-device at the command line, I get the following: > > boot-device=disk0:a disk:a > > So I know my first boot device is disk0, but how do I tell without > going to the OK prompt what actual device name disk0 is pointing to? > > Thanks! > > Laurence H. Cohen > ISM Unix System Administrator _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Wed Jan 25 11:36:06 2006
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:54 EST