SUMMARY: Problems bringing up domains in a E10000 - Panic Boot

From: Juan Carlos Garca Velasco <gvelasco_at_cuauhtemoc.edu.mx>
Date: Thu Dec 08 2005 - 20:13:13 EST
Hi again!

Thanks to Darren Dunham and Fabio for their answers, it's really amazing the 
help I receive even that my problem was kind of easy.

The only thing I have to do is to type this commmand at the OBP:

<#8> ok boot /sbus@4c,0/QLGC,isp@0,10000/sd

After trying all of the devices showed at the 

> <#8> ok show-disks
> a) /sbus@4c,0/SUNW,socal@1,0/sf@1,0/ssd
> b) /sbus@4c,0/SUNW,socal@1,0/sf@0,0/ssd
> c) /sbus@4c,0/QLGC,isp@0,10000/sd
> d) /sbus@48,0/SUNW,socal@1,0/sf@1,0/ssd
> e) /sbus@48,0/SUNW,socal@1,0/sf@0,0/ssd
> f) /sbus@48,0/QLGC,isp@0,10000/sd
> q) NO SELECTION 
> <#8> ok 

I got some errors but I think is one disk...

INIT: Command is respawning too rapidly.    Check for possible errors.
id:  SV "/usr/bin/srload -D -q"

WARNING: /sbus@4c,0/SUNW,socal@1,0/sf@0,0/ssd@w2200002037266d3c,0 (ssd10):
        Error for Command: load/start/stop         Error Level: Retryable
        Requested Block: 0                         Error Block: 0
        Vendor: SEAGATE                            Serial Number:
        Sense Key: Not Ready

WARNING: forceload of drv/atf failed
WARNING: forceload of misc/md_trans failed
WARNING: forceload of misc/md_raid failed
WARNING: forceload of misc/md_hotspares failed
WARNING: forceload of drv/atf failed
WARNING: forceload of drv/pln failed

Anyway, thanks for the help!



- Juan Carlos.

On Thu, 8 Dec 2005 18:17:33 -0500, Juan Carlos Garcma Velasco wrote
> Hi Managers,
> 
> This is the first time  I write to the list, I'm a kind of newbie  
> using solaris and at work I have an E10000 server.
> 
> So the big, big problem is that it stops working :( and all I know 
> about bringing up the domains in the E10000 server doesn't work...
> 
> Here is the output of some commands at the OBP:
> 
> <#8> ok boot disk0 -r
> Rebooting with command: boot disk0 -r
> Boot device: /sbus@49,0/SUNW,qfe@0,8c00000  File and args: disk0 -r
> Timeout waiting for ARP/RARP packet
> 23a00 hostname: webaplic
> whoami: no domain name
> root server: sspaplic
> root directory: /cdrom/sol_7_1199_sparc_sun_srvr/s0/Solaris_2.7/Tools/Boot
> panic - boot: Could not mount filesystem.
> Program terminated
> <#8> ok 
> 
> <#8> ok boot disk1 -r
> Rebooting with command: boot disk1 -r
> Boot device: /sbus@49,0/SUNW,qfe@0,8c00000  File and args: disk1 -r
> Timeout waiting for ARP/RARP packet
> 23a00 hostname: webaplic
> whoami: no domain name
> root server: sspaplic
> root directory: /cdrom/sol_7_1199_sparc_sun_srvr/s0/Solaris_2.7/Tools/Boot
> panic - boot: Could not mount filesystem.
> Program terminated
> <#8> ok 
> 
> <#8> ok show-disks
> a) /sbus@4c,0/SUNW,socal@1,0/sf@1,0/ssd
> b) /sbus@4c,0/SUNW,socal@1,0/sf@0,0/ssd
> c) /sbus@4c,0/QLGC,isp@0,10000/sd
> d) /sbus@48,0/SUNW,socal@1,0/sf@1,0/ssd
> e) /sbus@48,0/SUNW,socal@1,0/sf@0,0/ssd
> f) /sbus@48,0/QLGC,isp@0,10000/sd
> q) NO SELECTION 
> <#8> ok 
> 
> <#8> ok devalias
> net                      /sbus@49,0/SUNW,qfe@0,8c00000
> disk                     /sbus@48,0/QLGC,isp@0,10000/sd@0,0:a
> ttya                     /ssp-serial
> 
ssa_b_example            /sbus@40,0/SUNW,soc@0,0/SUNW,pln@b0000000,XXXXXX/SUNW
> ,ssd@0,0:a
> 
ssa_a_example            /sbus@40,0/SUNW,soc@0,0/SUNW,pln@a0000000,XXXXXX/SUNW
> ,ssd@0,0:a
> isp_example              /sbus@40,0/QLGC,isp@0,10000/sd@0,0
> net_example              /sbus@40,0/qec@0,20000/qe@0,0
> name                     aliases
> <#8> ok 
> 
> <#8> ok printenv boot-device
> boot-device 
> =         /sbus@48,0/SUNW,socal@0,0/sf@0,0/ssd@w22000020374f4c09,0:a 
> disk diskbrd diskisp disksoc net <#8> ok 
> 
> <#8> ok printenv diag-device
> diag-device =         disk diskbrd diskisp disksoc net
> <#8> ok 
> 
> <#8> ok probe-scsi-all
> This command may hang the system if a Stop-A or halt command
> has been executed.  Please type reset-all to reset the system 
> before executing this command. 
> Do you wish to continue? (y/n) y
> /sbus@4c,0/QLGC,isp@0,10000
> Target 0 
>  Unit 0   Disk     SEAGATE ST39103LCSUN9.0G034A9944632001
>                    Copyright (c) 1999 Seagate
>                    All rights reserved 
> Target 1 
>  Unit 0   Disk     SEAGATE ST39103LCSUN9.0G034A9944632967
>                    Copyright (c) 1999 Seagate
>                    All rights reserved 
> Target e 
>  Unit 0   Processor     SYMBIOS D1000           2   NvC     SAF-TE1.00
> 
> /sbus@48,0/QLGC,isp@0,10000
> <#8> ok 
> 
> As you can see I got an panic boot could not mount filesystem. I've 
> not only the E10000 server I also have a disk array A5000 one of 
> data and other for booting.
> 
> I will really appreciate any idea or suggestion, and of course I 
> will summarize my results. Thanks in advance.
> 
> - Juan Carlos G. Velasco
> _______________________________________________
> sunmanagers mailing list
> sunmanagers@sunmanagers.org
> http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
Received on Thu Dec 8 20:22:19 2005

This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:53 EST