<original posting below> Hi gurus, thanks to all who responded! Most of you suspected a memory problem (as we), but some suggested a problem with the internal disks. Hm, I tried booting the system from cd-rom, but also without success - so, I think the riser-board is defect. Don' have one lyin' around at the moment, but I will check it out as soon as I can get one. Thanks to the list for the quick + helpful responses, have a nice hackin'! Harald -----Urspr|ngliche Nachricht----- Von: sunmanagers-bounces@sunmanagers.org [mailto:sunmanagers-bounces@sunmanagers.org]Im Auftrag von Harald.Husemann@materna.de Gesendet: Donnerstag, 17. Mdrz 2005 19:00 An: sunmanagers@sunmanagers.org Betreff: E420 not booting up Hi gurus, got a problem here with a E420: When I power up the system, it begins running its POST-tests, and then it hangs. The last thing I see is the banner, and the "cycling dash" of the memory initialization. After memory initialization is complete, the line disappears (as usual), and that's it. I have enabled debugging, set the debug-level to "max", but I didn't spot any problem - everything's passed, up to the described point. I have also tried other memory modules, since we suspected a memory problem - no success.... Anyone seen this before? What is the next step after the memory init?? Thanks in advance, will summarize. Harald _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Fri Mar 18 08:07:23 2005
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:44 EST