The two micro switches in the back were working fine., the little points on the side panels were not contacting them though. So I just pushed those two points pout a bit and made sure that they are contacting properly. All is good now Thanx to you guys On 12/6/04 11:06 AM, "Steve Rieger" <steve.rieger@tbwachiat.com> wrote: > Hi all, > > I recently (a week ago) to delivery of an e450, my intentions were to learn > a bit more of the Solaris env that I have not had a chance to dig into as of > yet. > > I installed the os and patched it . Then I opened the covers and added > another disk board. And now the box will not power up. I get two good led's > on the power supply and also internally I get one led when the power is > plugged in. the two micro switched that only get activated when the side > panels are closed are ok, and as a backup I taped them in the closed > position just to see if the system would boot up. But no. > > > Any ideas as to where to look next. > -- > Steve Rieger > Direct 212-804-1131 > Cell 646-335-8915 > _______________________________________________ > sunmanagers mailing list > sunmanagers@sunmanagers.org > http://www.sunmanagers.org/mailman/listinfo/sunmanagers > -- Steve Rieger Direct 212-804-1131 Cell 646-335-8915 _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Tue Dec 7 10:43:37 2004
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:40 EST