Summary: trying to add qlc 2gb fibre HBA, doesn't seem to work

From: Dell, Mary <mdell_at_mesirowfinancial.com>
Date: Tue Sep 28 2004 - 09:59:12 EDT
Well, not exactly a solution, but I think I know what happened.  After it
failed to see the fibre HBA I recabled the juke for LVD scsi (it's mainly
LVD, it just has a fibre bridge) and attached it to my LVD scsi HBA.  The
LVD HBA already had a working juke attached to one channel.  I attached the
new juke to the second channel and lo and behold, the OS dropped that HBA as
well.  Removing the second juke and doing a boot/reconfigure didn't bring it
back, either.  I ended up rolling back via flash archive, to a version of
the server from about 2 days before I started installing packages to support
the fibre card, and the LVD HBA came back.

I was able to attach an identical juke to an identical machine, via LVD,
without losing the HBA.

Based on all of this and on input from folks here, I've surmised a couple of
things:

1. if you attach an improperly cabled, terminated, or just plain
incompatible device to an HBA, the OS may fail to detect the HBA thereafter

2. the million patches required for the X6767a fibre HBA may cause problems
in the sd or st driver.

So, in a nutshell, the solution was to roll back to the pre-fibre state of
the machine, and don't attempt to use the fibre HBA.  Bummer.

Thanks to all who responded...
Mary

-----Original Message-----
From: Dell, Mary [mailto:mdell@mesirowfinancial.com] 
Sent: Wednesday, September 22, 2004 4:27 PM
To: 'sunmanagers@sunmanagers.org'
Subject: trying to add qlc 2gb fibre HBA, doesn't seem to work


Hi folks,
 
I'm trying to go live tonight with a new jukebox, which I've attached to a
new HBA in my e220R - I can see it (juke/card) from the OK prompt but not
the os.  I've installed all the required packages and patches - at least
according to the doc for the card, X6767A - but it doesn't seem to see
anything from inside the OS.  And I'm not 100% sure how to tell, other than
doing an inquire from /etc/LGTOuscsi.  If I do prtconf it shows "driver not
loaded" for qlc but I'm not sure that means anything.  I've boot -r'd it a
zillion times - this is Solaris 9 - help?
 
Mary



     This communication may contain privileged and/or confidential
information. It is intended solely for the use of the addressee. If you are
not the intended recipient, you are strictly prohibited from disclosing,
copying, distributing or using any of this information. If you received this
communication in error, please contact the sender immediately and destroy
the material in its entirety, whether electronic or hard copy. Confidential,
proprietary or time-sensitive communications should not be transmitted via
the Internet, as there can be no assurance of actual or timely delivery,
receipt and/or confidentiality. This is not an offer, or solicitation of any
offer to buy or sell any security, investment or other product.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
Received on Tue Sep 28 09:59:00 2004

This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:38 EST