SUMMARY - issues with2 cross connected 3310 scsi array to 2 V240's

From: Laurence Moughan <Laurence.Moughan_at_aerlingus.com>
Date: Mon Sep 13 2004 - 08:00:03 EDT
My Chl3 on each 3310 was configured on a scsi id on controller 2 - I
only have one controller

access 3310 via console and reconfigured

DOH

.......................................................

Hi All,

I have connected two 3310 scsi arrays to 2 v240's.
I have build one raid 5 disks on the arrays constsing of the only 5
disks in each.

I have cabled up as single channel,

I have cabled up ch1 to node 1, ch3 to node 2  on each array.


from obp i can see

the disk of 3310 on ch1 - the array only of the 3310 on ch3  - on each
server.

when devfsadm;disks,

i can see then in format only the raid 5 disk on the connected 3310 on
chn1 - but not the "remote" disks on chn3


Anyone any ideas,  I only see mention also of the "local " chn 1 device
in messages as below,

pci@3scsi@4 is the chn1 device - connected !
pci@2scsi@4 is the ch3 device that i cannot see.

I have configured scsi inititator via an nvram file as per blueprintes
doc as below also ( on one machine only )


Sep 13 09:34:12 obeora1 scsi: [ID 365881 kern.info]
/pci@1e,600000/pci@2/scsi@4 (qus0):
Sep 13 09:34:12 obeora1 pci_pci: [ID 370704 kern.info] PCI-device:
scsi@5, qus1
Sep 13 09:34:12 obeora1 genunix: [ID 936769 kern.info] qus1 is
/pci@1e,600000/pci@2/scsi@5
Sep 13 09:34:12 obeora1 scsi: [ID 365881 kern.info]
/pci@1e,600000/pci@2/scsi@5 (qus1):
Sep 13 09:34:12 obeora1 pci_pci: [ID 370704 kern.info] PCI-device:
scsi@4, qus2
Sep 13 09:34:12 obeora1 genunix: [ID 936769 kern.info] qus2 is
/pci@1e,600000/pci@3/scsi@4
Sep 13 09:34:12 obeora1 scsi: [ID 365881 kern.info]
/pci@1e,600000/pci@3/scsi@4 (qus2):
Sep 13 09:34:12 obeora1 pci_pci: [ID 370704 kern.info] PCI-device:
scsi@5, qus3
Sep 13 09:34:12 obeora1 genunix: [ID 936769 kern.info] qus3 is
/pci@1e,600000/pci@3/scsi@5
Sep 13 09:34:12 obeora1 scsi: [ID 365881 kern.info]
/pci@1e,600000/pci@3/scsi@5 (qus3):
Sep 13 09:34:12 obeora1 scsi: [ID 193665 kern.info] sd61 at qus2:
target 0 lun 0
Sep 13 09:34:12 obeora1 genunix: [ID 936769 kern.info] sd61 is
/pci@1e,600000/pci@3/scsi@4/sd@0,0
Sep 13 09:34:12 obeora1 scsi: [ID 365881 kern.info]    
<SUN-StorEdge3310-0325 cyl 34746 alt 2 hd 127 sec 64>

/nvramsettings
probe-all
cd /pci@1e,600000/pci@3/scsi@4
6 " scsi-initiator-id" integer-property
device-end
cd /pci@1e,600000/pci@2/scsi@4
6 " scsi-initiator-id" integer-property
device-end
install-console
banner

#eeprom
use-nvramrc?=true
nvramrc=nvramrc=probe-all
cd /pci@1e,600000/pci@3/scsi@4
6 encode-int " scsi-initiator-id" property
device-end
cd /pci@1e,600000/pci@3/scsi@5
6 encode-int " scsi-initiator-id" property
device-end
install-console


Please advise if anyone can see the obvious !

Thanks

Laurence



For low fares and great deals on hotels, car hire and travel insurance visit http://www.aerlingus.com
of any action in reliance upon, this information by persons or entities
other than the intended recipient is prohibited.If you have received
this email in error please notify the sender immediately and delete
the material.
*******************************************************************************
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
Received on Mon Sep 13 07:59:56 2004

This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:37 EST