Thanks to everyone who replied, tried a number of things down to disassembling and dusting with no results. However, now we've pulled another U10 from the shelf and moved the drives and appropriate cards over. The system claims that ge0 is not a valid interface. I can test this interface from the OBP and see traffic, but solaris refuses to see it. I've already did devfsadm -i ge and a boot -r and a full-blown devfsadm -C. Any other suggestions? Thanks Tyler. On Mon, 19 Jul 2004, Tyler Hardison wrote: > I've got an Ultra 10 that we use as a tape backup server. Today after > moving it (swear no hardware changes were involved ;-) ) it refuses to > wake up. I plugged a keyboard in and was able to get it into diag > (stop-d) Now here is the strange part. It passes POST, not even so much > as a wink of a problem until it gets to "decompressing in memory" > displays a size in hex and then just hangs. I let it go for an hour > like this with no change. > > Does someone with an U10 have a complete OBP diag printout showing what > comes after this? I have a feeling that whatever step is after this is > the cause of my hangup. If someone wants more detail in the output I'll > be happy to provide that. > > Thanks > > Tyler. > _______________________________________________ > sunmanagers mailing list > sunmanagers@sunmanagers.org > http://www.sunmanagers.org/mailman/listinfo/sunmanagers _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Tue Jul 20 14:20:59 2004
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:35 EST