Hi All, My query related to an internal SCSI HD (which was used as the boot device) taken from a failed Ultra 2 which I was trying to read on an Ultra 1; probe-scsi-all could see the drive but format could not. Thanks to all who replied. Among the suggestions were (i) boot -r (ii) Check for loose cables (iii) Check that /etc/vfstab has the correct entries (iv) Run devfsadm (v) Boot from a CD and check cXtXdX entries for the drive then check that these are correct in vfstab There wasn't a CD drive in the machine and none of the other solutions yielded a quick solution so I decided to boot from the original Ultra 1 HD and check if I could mount the 'Ultra 2 HD' when it was in Bay 2 of the Ultra 1. This worked fine and I'm now copying the information to tape. I hope the above is useful. Regards, John Kelly. _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Tue Jun 22 11:07:21 2004
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:34 EST