Very fast responses from a lot of people. Simple answer.. hub= half duplex switch=full. Made the changes and its flying. Thanks everyone -----Original Message----- From: Douglas Palmer [mailto:palmer@nyed.uscourts.gov] Sent: Tuesday, June 29, 2004 10:45 AM To: Loukinas, Jeremy Subject: Re: Terrible network performance between two machines on same network On Tue, 29 Jun 2004, Loukinas, Jeremy wrote: > I have two test machines. One U30 and one Netra T105. I am ftp-ing a 1.9gb > file between the two. Pretty standard Solaris 9 OS, nothing fancy. The file > is taking many hours to transfer. Never really had to diag this bad of > network perf before. These machines are on their own 10/100 hub nothing else > is on this segment. > > Both machines are set for 100mb full duplex. I have tried both scp and ftp > to get the file across. If it is really a hub, then they should be set to half-duplex. If it is a switch, then make sure the switch ports are locked down to 100Mb/full as well. -- DCP _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Tue Jun 29 11:07:34 2004
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:33 EST