Thanks to Adnres for replying and this worked. 1) Options 4 and 11 of vxdiskadm 2) Remove the disk Phisycally 3) Wait 1 minute and install new disk 4) The disk must be see with format command 5) vxdctl enable 6) Option 5 of vxdiskadm My original question I have a d2 array that has a failed disk in it. > It's under Veritas Volume Manager control. > Do I need to issue any commands at the system level before > pulling this disk out other than running vxdiskadm and > removing the disk from Volume Manager? > I know on the A5000 Array's you had to issue the luxadm > command to remove a particular disk device. Is that the case > for the d2 array? > > Thank You. > David Martini > LLNL _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Mon Jun 7 18:57:24 2004
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:32 EST