Thanks to all that replied, especially Darren Dunham. As it turn out it is possible and it works quite well. I will be testing the full restore later this morning on the actual server in question. When you install the second instance you need to do an INITIAL install and then preserve all of the other partitions....for filesystems, I just renamed the mount point by prefixing it with a /a. In my case I only needed to install the core OS and then install the VRTS NBU agent. The key is to pay attention to the bootpath before you go and install the second instance. Write it down and then install. Then to change it all that is required is to go into the DCA and when you are given the option of where to boot from, select BOOT TASKS...then you can go and change the bootpath and boot from the disk. Alternatively, if the system is up and running and you want to change to the bootpath it should be possible to do this with the eeprom command. (This I haven't had a chance to test yet.) Regards, Marco _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Thu Dec 11 07:23:11 2003
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:25 EST