Hi, Sory about this late summay. I have recieved many gratefull contributions and suggestions from many people: Thanks to: Vahid Moghadassi, The Hatter, Reggie Beavers, Kevin Smith, Jose Luis R odriguez, Joe Fletcher, Luc I Suryo For sharing their experience about using audio DAT tapes The conclusion is: Audio DAT tapes should work as DDS 2 tape but it is highly discouraged for backups and risky threads. Data tapes would works in a audio recorder but that would be wasting money because they are more expensive. In the other hand about the question if a computer tape drive can read and write audio data I have recieved the a lot of useful links and complete information from: Mark, S. Davis, Sevan Venture37 Thanks to all of them. The conslusion is that depending on the model and firmware, some computer tape drives using the suitable software have the capacity of reading and writing Digital Audio. The links below are a good point to begin. http://www.trygve.com/playaudiodat.html http://www.solorb.com/dat-heads/ http://www.mashek.com/DATdrives http://www.ncf.ca/~aa571/dat2wav.htm This was my primary question, >Hi, >Does anybody knows/has experience about if audio 4mm tapes can be >recognized on 4mm tape drives. Best regards, ------------------------------------------------ Kurosh Khan-Afshar ------------------------------------------------ _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Thu Nov 13 05:55:45 2003
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:23 EST