Thanks for the quick answer to: Rob De Langhe Hargrave, Mark E Davis, Uly Ximo Domenech The way to check link speed (10/100) and Duplex mode (Full/half) is to get it from "ndd /dev/ce" parameters link_mode and link_speed. ndd -set instance 0 (for ce0/hme0/whatever0) Duplex Mode: ndd -get /dev/ce link_mode 0 -> half 1 -> full Link Speed: ndd -get /dev/ce link_speed 0 -> 10 Mbps 1 -> 100 Mbps I also get a response about use "netstat -k", but I thing the above is easier. Regards, Jordi -----Original Message----- From: Jordi Vidal [mailto:jordivi@wtransnet.net] Sent: Thursday, October 16, 2003 5:28 PM To: sunmanagers@sunmanagers.org Subject: How to check fdx/hdx network status Hi How can I know if my network card is working at 100Mbps fdx or 100Mbps hdx?. I have no fisical access, so I cannot plug/unplug the UTP and tail -f dmesg output. "ndd /dev/ce" reports "1" for all capabilities Regards Jordi _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers >>> 30th Telindus International Symposium Thursday, October 30, 2003 - Brussels Expo, Belgium Check out the complete conference programme, exhibition, workshops and register now for this high value 'must attend' event! http://www.telindussymposium.com <<< _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Thu Oct 16 12:16:48 2003
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:22 EST