I used <cntrl> <pause> which sent brak and brought the system to OK prom. Then next time around I chose Dec vt100 terminal and I was able to install OS from terminal. Then I installed video card drivers with SUN USB keyboard plugged in and it worked! ----- Original Message ----- From: Rongsheng Fang <rfang@cs.gmu.edu> Date: Monday, November 3, 2003 2:50 pm Subject: V240 and monitor problem [Sun Managers] > Hi, > > I saw a post you sent to the sunmanagers list on Oct 10, 2003: > > =================================================================================== > Hello > > New v240 came without video card so we installed appropriate PCI > video > card and started the system. System boots from disk and does not > recognize > video card probably becase we have not installed drivers for it yet. > We connected Hyperterminal to serial management port and saw the > system > sitting at language configuration menu. We went on till the point > where > it asked to identify terminal and by mistake we selected some > terminal > which it is not happy with. The configuration menu is all screwed > up > and we see press esc-2 to continue and cursor is now all over the > place. > We can not continue configuring this system anymore. Everytime we > reconnect or power cycle (because there is no stop-A sequence on > the > keyboard) we end up at the menu where it asks for IP address but > again > cursor and text is all over the place. We started in diagnostic > mode > and it wants to boot from net and gives ARP/RARP errors because > network > card is not configured yet. > How do I get in to this system and get back to menu where it asks > for > terminal via Hyperterminal? How do I use stop-A to boot from > CDROM where > hopefully it will ask for terminal? We need to get in to system > to install > video card drivers for monitor to work. How do I make it forget > the setting > it picked initially when we booted from disk first time? Any help > is appreciated. > =================================================================================== > > We are having the same problem (messy terminal) with our V240. > Have you > solved this problem so far? If so, could you please share with me > your > solution? > > Thanks very much, > > Rongsheng _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Mon Nov 3 21:00:58 2003
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:21 EST