Hello all, I find where the problem was: hostname! If I enter as hostname "dns", the install script wouldn't proceed, so I tried with "dns01" and it goes on. I tried with sol 9 8/03 and sol 9 4/03, on both v240 and E450 machines, same behavior. So be aware! Here is output (I changed IP address in output, so my customer won't complain about privacy): <---snip---> You have entered the following values: Host Name: dns IP Address: xxx.xxx.3.7 System part of a subnet: Yes Netmask: 255.255.255.0 Enable IPv6: No Default Route: Yes Router IP Address: xxx.xxx.3.100 Name Service: None Enable Kerberos: No Time Zone: Europe/Zagreb Enter 'y' to apply these values and proceed to the next stage of the installation, or 'n' to return to the beginning and make changes (y/n): y Please wait while the system is configured with your settings... An error has occurred in configuring the system. Please go back and check your settings. <Press ENTER to continue> <---snip---> Milan Matesin _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Thu Oct 23 11:05:31 2003
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:19 EST