Hello Managers : Thanks for all the instantaneous responses I got from fellow gurus....it's amazing. Interestingly .. I had "sbus-probe-list" set to "e01" instead of "e0123" (default ). I figured out while I was booting with diag-switch set to true. I changed the sbus-probe-list values to e0123, and then I could now see all my HME interface instances. My sincere thanks to all responded below: Tony --- ttk67@xxxxx.com minoti .... minoti.koul@xxxx.com Iwai ryan ----- iwair@pac.xxxx.mil Hichael Morton ---- mh1272@xxxx.com Colin Bigam ----- colin@west.xxxxx.com Reggie Beavers ----- reggiebeavers@xxxx.com Darren Dunham ----- ddunham@xxxx.com neil quiogue ---- neil@xxxxx.com Best Regards, Anand V -------------------------------------------------------- ORIGINAL MESSAGE: Hello Managers, I installed 2 additional HME cards in my Ultra2 workstation server. For some reasons, I can't plumb these interfaces. I did all kinds of sysadmin stuff. Just wondering, whether there is any kind of issues with this kind of multiple interfaces in Ultra2. I appreciate, your help. Best Regards, Anand -------------------------------------------------------------- _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Tue Jul 29 02:09:46 2003
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:17 EST