Hello managers, my thanks to all who answered to my question (see below)! joe.fletcher@btconnect.com said: > You should be aiming to use either ce0 or ce1. > The fcip0 is IP over fibre-channel. and all the others said about the same. Nevertheless i'm astonished about the differences in installing Solaris-9 compared to 8 or 7... - or i still have an unidentified problem. I will see. Big thanks! With regards, Bernt Christandl ----------------------------------------- My original question was: Hello managers, i have a new Sun Fire 480R, connected to the network via the Gigabit Twisted Pair (RJ45) connector. The switch LEDs to me seem to "shine" correctly. Now i try to install Solaris-9 (from DVD) onto that machine and it "says": ... Skipping interface fcip0 Skipping interface ce1 Skipping interface ce0 ... Is that normal? And how then is the name of the network interface i'm trying to use? Afterwards when having entered all those network data the machine "says" that the Name Server information entered is incorrect but to me it seems to be correct with the possible exception of the network interface name... With regards, Bernt Christandl _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Wed Jul 16 07:11:23 2003
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:16 EST