Hi All, First let me thanks all you guys, who really helped me to solve above the both problems. 1) T3 problem : T3 storage will not come with console cable, tried lot to connect via serial but could not succeeded. Then later found T3 support only 10 mbps ethernet, configured hme1 as 10 mbps and able to telnet to T3. Then found Master controller was disabled and made it enable by command "enable u1" then it started working and amber LED become Green. After 10 days again master controller card disable automatically , then we replace controller since then working fine. FYI, both controller firmware's are same version. 2) CPU 19 E-Cache problem: Based on my system crash message, most of them are advised to install latest solaris 8 "1108528-22" patch to resolve CPU E-cache problem. I upgraded patch from 108528-07 to 108528-22. and monitoring the system closely. Special thanks all below once again. Ors, Carl ma and Dustin. mail Id`s are Ors.Tiszay@eth.ericsson.se, carl_ma@scotiacapital.comand Hoff, Dustin - BLS CTR" <Hoff.Dustin@bls.gov Best Regards, Shanker Durgad, IT Infrastructure & Operations, Chartered Semiconductor Manufacturing Ltd. DID : 63601749 ----- Forwarded by DURGAD Shanker/IT/CHRT/ST Group on 09/07/2003 11:22 AM ----- DURGAD Shanker/IT/CHRT/ST Group 25/06/2003 02:06 PM To: sunmanagers@sunmanagers.org cc: Subject: T3 Prblem [This e-mail is confidential and may also be privileged. If you are not the intended recipient, please delete it and notify us immediately; you should not copy or use it for any purpose, nor disclose its contents to any other person. Thank you.] Hi All, I have connected two T3`s to E3500 system and as configured as "Partner Group". Noticed that , the Controller LED ( Online) Amber LED is blinking in Master controller unit and other alternative master controller unit LED is Green. Telnet to T3 is not possible and Since few days system rebooting with an error in message file "Jun 23 09:04:32 Fab3AceYMS SUNW,UltraSPARC-II: [ID 206736 kern.warning] WARNING: [AFT1] EDP event on CPU19 Data access at TL=0, errID 0x0002b203.ab5f1552" Few of our friends are suggest to pachedup with latest solaris cluster patch and this error message is belongs CPU cache related prblem and we are not getting a down time to do this. Could any one tell us , is there any relation with T3 amber LED is and CPU19, and I would like to know what could be the root cause? Please let me know if any one encounter this kind of problem. Thanks, Shanker Durgad, IT Infrastructure & Operations, Chartered Semiconductor Manufacturing Ltd. DID : 63601749 [This e-mail is confidential and may also be privileged. If you are not the intended recipient, please delete it and notify us immediately; you should not copy or use it for any purpose, nor disclose its contents to any other person. Thank you.] _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Tue Jul 8 23:48:24 2003
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:15 EST