THANKS TO ALL THOSE WHO REPLIED. Whilst there doesn't seem to be any solid information on where the DACstore is stored on the disk, Tony from Sun has offered lots of advice on adding disks to arrays: o Quickest 3 way: Hot-Add the disks once at a time (takes 2-3 mins per drive). Wait until the LED goes solid green for each drive. What this does is physically recognise the new drive and reformat the hidde 40MB DACStore area on the drive and load it with the configuration currently running on the new home array. o Another method would be to reset the "old" array to a default configuration before you remove the drives, but this would mean the complete destruction of data and LUNs on that array (plus the luxury of a spare array to do that operation). /Chris Wells _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Thu Jun 26 20:22:22 2003
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:15 EST