No replies, but figured it out... Just needed to restart X after setting it. Pete --- Sent: Friday, May 16, 2003 12:12 PM To: 'sunmanagers@sunmanagers.org' Subject: Frame Buffer Resolution All, I have a Blade 2000 Sol-8 with two XVR-1000 frame buffers.. There used to be two 21" CRTs attached but I've switched one out for a 24" wide screen CRT. I'm trying to set the resolution to SUNW_STD_1920X1200X75 with: fbconfig -dev /dev/fbs/gfb0 -stream a -res SUNW_STD_1920X1200X75 try which sort of works, but when it changes, the resulting image is small, probalby half the size of what it should be to fill the screen. I've hit reset on the monitor as well, so it's not custom sizing which is causing the small image. How can I set the resolution properly to fill this beast of a CRT? Any thoughts appreciated. Peter _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Fri May 16 16:08:08 2003
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:12 EST