On Fri, Jun 06, 2003 at 11:12:25AM -0500, Bill Bradford wrote: > I need to know the specs of the screws/nuts/washers that come with an > E250 rackmount kit, ASAP. Dug a little depper, and found the info in the system handbook. Sun E250 Rack Mount Installation Manual http://sunsolve.sun.com/data/805/805-3611/pdf/805-3611-12.pdf - #10 Flathead screw (2) - #10 SEMS Panhead screw (14) - M4 SEMS Panhead screw (20) - M4 KEPTS nut (14) > Need the same info (if its not the same hardware) for the rails on a > SunFire 280R as well. Sun Fire 280R Server Setup and Rackmounting Guide http://sunsolve.sun.com/data/806/806-4805/pdf/806-4805-11.pdf - 10-32x3/4 Screws (8) - B-32 Flat Washers (8) - B-32 Locking Nuts (?) Bill -- bill bradford mrbill@mrbill.net austin, texas _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Fri Jun 6 12:44:08 2003
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:12 EST