Hi agn, got only one response so far, from Hichael Morton, who pointed me to sun's hcl. Thanks, I'll check it out! Hichael also gave me the hint to put the ADR on a seperate IDE-chain, and (of course) do a reconfig boot after adding the drive. Hm, seems no-one did this before, so I'm again a pioneer, .-) No problem, I'll try it - and inform the list abt. success or failure. Thanks to Hichael, have a nice hackin', Harald ============================================ Harald Husemann Systems Engineer Teammanager Unix administration and Configuration Management Materna Gmbh - Vo_kuhle 37 - D-44141 Dortmund, Germany Phone: +49-231-5599-8684 Mobile: +49-179-2300651 -----Urspr|ngliche Nachricht----- Von: Husemann, Harald [mailto:harald.husemann@Materna.DE] Gesendet: Mittwoch, 9. April 2003 15:55 An: sunmanagers@sunmanagers.org Betreff: Using OnStream ADR in a Blade100 Hi managers, I have to backup some data, and have an ONSTREAM ADR 30 (30 GB, IDE-Interface) laying around... I'd like to use it in a SUN Blade 100 (running Solaris 8), since the SUN has an IDE-Interface, it should work. But, before I disassemble my Blade: Anyone made experiences with this? The ADR runs perfectly well under LINUX , but I didn't find anything abt. using the drive with Solaris... Thanks in advance, will summarize, Harald ============================================ Harald Husemann Systems Engineer Teammanager Unix administration and Configuration Management Materna Gmbh - Vo_kuhle 37 - D-44141 Dortmund, Germany Phone: +49-231-5599-8684 Mobile: +49-179-2300651 _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Thu Apr 10 07:52:29 2003
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:08 EST