Thanks for the quick responses. Most contained the following advice: You can write a startscript that selectivly changes the configuration of every nic. ndd -set /dev/hme0 instance 0 ndd -set /dev/hme adv_100T4_cap 0 ndd -set /dev/hme adv_100fdx_cap 1 ndd -set /dev/hme adv_100hdx_cap 0 ndd -set /dev/hme adv_10hdx_cap 0 ndd -set /dev/hme adv_10fdx_cap 0 ndd -set /dev/hme adv_autoneg_cap 0 ndd -set /dev/hme0 instance 1 ndd -set /dev/hme adv_100T4_cap 0 ndd -set /dev/hme adv_100fdx_cap 0 ndd -set /dev/hme adv_100hdx_cap 0 ndd -set /dev/hme adv_10hdx_cap 1 ndd -set /dev/hme adv_10fdx_cap 0 ndd -set /dev/hme adv_autoneg_cap 0 Got a link to a Sun document: http://sunsolve.Sun.COM/pub-cgi/retrieve.pl?doc=finfodoc%2F16728&zone_32=%5Bndd%2A%20hme%2A%20instance%2A%20%5D Also got tips on how to put it into /etc/system: set hme:instance=1 set hme:hme_adv_10fdx_cap=0 set hme:hme_adv_10hdx_cap=1 set hme:instance=0 set hme:hme_adv_100hdx_cap=0 set hme:hem_adv_100fdx_cap=1 http://www.unixadm.net/howto/100FullHowto.html for details > -----Original Message----- > From: oukami@everestkc.net [mailto:oukami@everestkc.net] > Sent: Monday, March 17, 2003 2:09 PM > To: sunmanagers@sunmanagers.org > Subject: Configuring hme interfaces for Half and Full Duplex > > > Hi all, > > We have a server that has both hme0 and hme1 configured on > it. Is there > a way to lock hme0 to 100Mb Full Duplex and hme1 to 10Mb Half? Using > ndd just affects /dev/hme, consequently affecting the behavior of both > hme0 and hme1. > > Any ideas? > > Thanks, > bob _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Tue Mar 18 11:19:22 2003
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:08 EST