Thank's to everyone who answered! The short, sweet, and simple answer to my question is: You can't! A solution provided by Sun: Switch to SDS... --- - Shawn L. Evans - - mailto:s.evans@tricorind.com - - Phone: 1.618.632.9252 x247 - -----Original Message----- From: Evans, Shawn [mailto:s.evans@TriCorInd.com] Sent: Tuesday, April 01, 2003 2:43 PM To: sunmanagers@sunmanagers.org Subject: T3 Lun and Veritas-vxvm I am attempting to take a lun from a T3 show below and configure it within format to have the slices shown below. Then I want to take this same disk, and import it to Veritas, but, I only want to import slice 3 leaving 0 and 1 untouched. Is this possable, and if so, how? 4. c4t1d0 <SUN-T300-0117 cyl 34530 alt 2 hd 32 sec 128> /ssm@0,0/pci@1d,600000/pci@1/SUNW,qlc@4/fp@0,0/ssd@w50020f2300007f61,0 Part Tag Flag Cylinders Size Blocks 0 usr wm 1 - 512 1024.00MB (512/0/0) 2097152 1 usr wm 513 - 1024 1024.00MB (512/0/0) 2097152 2 unassigned wu 0 0 (0/0/0) 0 3 usr wu 1025 - 1057 66.00MB (33/0/0) 135168 4 unassigned wu 0 0 (0/0/0) 0 5 unassigned wm 0 0 (0/0/0) 0 6 unassigned wm 0 0 (0/0/0) 0 7 unassigned wm 0 0 (0/0/0) 0 The reason is I am attempting to 'simulate' a T3+ and slice 0 and 1 are for SNDR. --- - Shawn L. Evans - - mailto:s.evans@tricorind.com - - Phone: 1.618.632.9252 x247 - _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Wed Apr 2 14:17:35 2003
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:08 EST