Thanks to all who replied, you know who you are... I got three basic responses: #1 use iostat -En to get the drive serial # and find the matching Serial# on the drive. This worked just fine for me. #2 use dd to either read data from or write data to the drive and watch for the blinkin' & flashin'. This also worked for me. #3 use format -> [drive] -> analyze -> read -> yes to geneerate the blinkin' & flashin'. This worked really well, practically turned the LED off with all the activity. A number of people also sent me drive to slot mappings, which might have worked had sun assembled the box ;) And for those who are wondering, out of idle curiosity, it was drive 14. On Mon, 10 Mar 2003, F.M. Taylor wrote: > I have aan e450 with 18 drives installed. One of the drives haas > failed. The system knows the HD by two names sd(62) and c4t2d0. > > I have no idea which drive out of the 18 this one is. Is there some > utility that will flash the activity light on the drive, or turn it off > or something so I can figure out which drive this is?? > > I should probably know how to identify which drive it is, but don't. > > TIA > > -- Mike Taylor Coordinator of Systems Administration and Network Security Indiana State University. Rankin Hall Rm 053 210 N 7th St. Terre Haute, IN. SANS GSEC http://www.sans.org/ _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Mon Mar 10 12:10:35 2003
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:04 EST