I got a few replies from folks with very good suggestions but none that led to a resolution. Ultimately, I was connected with someone from TechSource who sent me a patch. The patch itself did not clean up the problem but may have been a factor. What I think resolved the issue was this: I tried executing fxtconfig -prconf and found some interesting info, amongst which was the following: EDID Data: Standard Timing: 1600x1200x60, 1280x1024x60, 1280x960x60.....etc I was trying resolutions with a higher third number because I was led to believe that at 60, there would be interference from our power source and/or fluorescent lighting. With the resolution set at 1600x1200x60, it is working beautifully and I am getting all the crispness I expected from this card and monitor with no video dropout. Thanks Pablo and Alex for your replies. -----Original Post----- I have installed one of these in my SunBlade 2000 machine. I downloaded the drivers from the TechSource web site and installed them. Problem is the ViewSonic monitor I plugged into it keeps dropping out, almost like it is momentarily losing the video signal. Anybody see this before or have any ideas how I might resolve this or even IF it can be resolved.? _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Wed Feb 26 11:38:55 2003
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:04 EST