......determine which board it is that your QFE card is in, because you know that is board three. Then compare the sbus device path of the QFE to the device paths of the lpfs devices...... --------------------- ......2bus@2,0 is associated with board 1 ( rear slot ) sbus position 0, sbus@6,0 is associated with board 3 (rear slot) sbus position 0 you might want to take a look at http://uk.sunsolve.sun.com/pub-cgi/show.pl?target=content/content2 it show how to work out paths in enterprise servers....... Thank you Trent, thank you Cris. Ciao ----- Original Message ----- From: "Peppe" <peppe-71@libero.it> To: <sunmanagers@sunmanagers.org> Sent: Wednesday, February 19, 2003 3:42 PM Subject: associate path to the board > I have an E4500 and this is the output of prtdiag (only the I/O section): > > ========================= IO Cards ========================= > > Bus Freq > Brd Type MHz Slot Name Model > --- ---- ---- ---------- ---------------------------- > -------------------- > 1 SBus 25 0 QLGC,isp/sd (block) QLGC,ISP1000U > 1 SBus 25 1 lpfs/sd (block) LP9002S > 1 SBus 25 2 SUNW,hme SUNW,501-2919 > 1 SBus 25 3 SUNW,hme > 1 SBus 25 3 SUNW,fas/sd (block) > 1 SBus 25 13 SUNW,socal/sf (scsi-3) 501-3060 > 3 SBus 25 0 QLGC,isp/sd (block) QLGC,ISP1000U > 3 SBus 25 1 lpfs/sd (block) LP9002S > 3 SBus 25 2 SUNW,qfe SUNW,sbus-qfe > 3 SBus 25 2 SUNW,qfe SUNW,sbus-qfe > 3 SBus 25 2 SUNW,qfe SUNW,sbus-qfe > 3 SBus 25 2 SUNW,qfe SUNW,sbus-qfe > 3 SBus 25 3 SUNW,hme > 3 SBus 25 3 SUNW,fas/sd (block) > 3 SBus 25 13 SUNW,socal/sf (scsi-3) 501-3060 > > Two LP9002S connect a clarion array to the server. > > This is the output of format: > > # format > Searching for disks...done > > > AVAILABLE DISK SELECTIONS: > 0. c1t8d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248> > /sbus@3,0/QLGC,isp@0,10000/sd@8,0 > 1. c1t9d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248> > /sbus@3,0/QLGC,isp@0,10000/sd@9,0 > 2. c1t10d0 <SUN9.0G cyl 4924 alt 2 hd 27 sec 133> > /sbus@3,0/QLGC,isp@0,10000/sd@a,0 > 3. c1t11d0 <SUN9.0G cyl 4924 alt 2 hd 27 sec 133> > /sbus@3,0/QLGC,isp@0,10000/sd@b,0 > 4. c1t13d0 <SUN9.0G cyl 4924 alt 2 hd 27 sec 133> > /sbus@3,0/QLGC,isp@0,10000/sd@d,0 > 5. c8t15d1 <drive type unknown> > /sbus@2,0/lpfs@1,0/sd@f,1 > 6. c8t15d2 <DGC-RAID10-0099 cyl 61438 alt 2 hd 256 sec 12> > /sbus@2,0/lpfs@1,0/sd@f,2 > 7. c8t15d3 <drive type unknown> > /sbus@2,0/lpfs@1,0/sd@f,3 > 8. c8t15d4 <DGC-RAID10-0099 cyl 61438 alt 2 hd 256 sec 12> > /sbus@2,0/lpfs@1,0/sd@f,4 > 9. c9t9d0 <drive type unknown> > /sbus@6,0/lpfs@1,0/sd@9,0 > 10. c9t9d1 <DGC-RAID10-0099 cyl 61438 alt 2 hd 256 sec 12> > /sbus@6,0/lpfs@1,0/sd@9,1 > 11. c9t9d2 <drive type unknown> > /sbus@6,0/lpfs@1,0/sd@9,2 > 12. c9t9d3 <DGC-RAID10-0099 cyl 61438 alt 2 hd 256 sec 12> > /sbus@6,0/lpfs@1,0/sd@9,3 > 13. c9t9d4 <drive type unknown> > /sbus@6,0/lpfs@1,0/sd@9,4 > Specify disk (enter its number): > > > My question is: The path /sbus@2,0/lpfs@1,0/ is associated to the first (board > 1) or second (board 3) LP9002S?? > > Thank you in advance. > _______________________________________________ > sunmanagers mailing list > sunmanagers@sunmanagers.org > http://www.sunmanagers.org/mailman/listinfo/sunmanagers _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Wed Feb 19 10:59:22 2003
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:03 EST