SUMMARY: T3 Connection

Thanks. I finally got it to work. It seems the T3 didn't like the crossover
cable, when I connected it to a hub it worked.


margot@iso.org wrote:

> Cathy,
>
> If it helps here is a small non exhaustive checklist of files to check...
>
> /etc/defaultdomain       Set the default NIS domain name, if any, if it
> changed.
> /etc/defaultrouter       Set the default router's IP address, if it changed.
> /etc/hostname.le0        (or .hme0 or ?) Update if the hostname changed.
> /etc/hostname6.le0       (or .hme0 or ?) Ditto, if you use IPv6.
> /etc/hostname6.ip.tun0   Update if you use a IPv4/IPv6 tunnel (e.g., 6bone)
> /etc/nodename            Update if the hostname changed.
> /etc/nsswitch.conf       Update if your name resolution method/order
> changed.
> /etc/resolv.conf         Update if your name servers/domain changed (DNS
> only).
> /etc/inet/hosts          Make sure your IP address is updated or added here.
>                          List your FQDN is first, before the short hostname.
>                          E.g., "192.168.128.64 foo.bar.com foo"
> /etc/inet/ipnodes        IPv6 version of hosts file (Solaris 8+).
> /etc/inet/netmasks       Set your network number & netmask, if it changed.
> /etc/inet/networks       Set your network name, if it changed.
> /etc/net/ticlts/hosts    For the streams-level loopback interface.
> /etc/net/ticots/hosts    For the streams-level loopback interface.
> /etc/net/ticotsord/hosts For the streams-level loopback interface.
>
> HTH, Joel
>
> ps. I assume you're in Sol8...
>
> > -----Original Message-----
> > From: sunmanagers-admin@sunmanagers.org
> > [mailto:sunmanagers-admin@sunmanagers.org]On Behalf Of Cathy M.
> > Bodenstedt
> > Sent: 2003-02-12 15:30
> > To: 'sunmanagers@sunmanagers.org'
> > Subject: T3 Connection
> >
> >
> > Hello All,
> >
> >
> > I'm trying to get a network connection from a V880 to a T3 with no
> > luck.  This is what I've done so far.
> >
> >
> > a. Made an entry in /etc/ethers
> > 00:20:?????  r2d2-t3
> >
> > b. Made an entry in /etc/hosts
> >
> > 192.168..xx.88   r2d2
> > 192.168.xx.89    r2d2-t3
> >
> > c. Made sure rarpd was running
> >
> > d. Connected a crossover cable from the t3 to the v880, since I don't
> > have a console cable. I've have a green connection light on both ends.
> >
> > e. reset the t3.
> >
> > So what am I missing.
> >
> > --
> > Phone: 210-925-3244
> > DSN:   945-3244
> >
> > [demime 0.99c.7 removed an attachment of type text/x-vcard which
> > had a name of bodenste.vcf]
> > _______________________________________________
> > sunmanagers mailing list
> > sunmanagers@sunmanagers.org
> > http://www.sunmanagers.org/mailman/listinfo/sunmanagers
> >

--
Phone: 210-925-3244
DSN:   945-3244

[demime 0.99c.7 removed an attachment of type text/x-vcard which had a name of bodenste.vcf]
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers