Thanks to everyone that responded. Unfortunately we've exhausted all possibilities with no success, so we're sending the machine back for some testing. Right now it looks to me like a bad serial port, unlikely as that seems. On Tue, 3 Dec 2002, Hubert Chu wrote: > > We're experiencing problems connecting to a new V480 through a serial > connection. I'm connecting directly to the 480's serial port with a null > modem RJ-45 cable. I can see the POST, boot sequence, and login prompt > just fine, but I'm unable to transmit any commands. I'm also unable to > send a break signal. > > I'm almost certain the cabling is correct, as we set up our other 480s in > the same manner. Has anyone ever experienced this problem? Could it be a > hardware problem with the serial port? > > TIA _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Wed Dec 4 13:33:52 2002
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:42:59 EST