SUMMARY Non Sun-monitors

From: SysAdm <sunadmin_at_norsar.no>
Date: Fri Nov 15 2002 - 02:11:04 EST
Original post:

>    I'm considering LDC-monitors (or non-Sun CRTs).
>    
>    Does PGX64 or Expert3D-Lite frame buffers require a valid senseID 
>    from the monitor, or is it possible to use max. resolution and refresh 
>    rate on non-Sun monitors as well?
>    
>    When connecting non-Sun monitors to frame buffers like Creator3D,
>    we only get 1152x900x66Hz...
>    
>    Any recommendations on good LCD monitors for Sun (SunBlade) ?

Apparently, m64config and fbconfig does the trick. I have had problems
with this, some monitors does not support the same frequency as the 
graphics board support...

Or, optionally, eprom setting:

setenv output-device screen:r1024x768x66

- Nils
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
Received on Fri Nov 15 02:14:21 2002

This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:42:58 EST