Thanks to Dave Dunaway <bela@nivek.org> (total forgot about this...) anyway get device address from 2nd network card i used 'dmsg' and got teh following info hme1 is /pci@1f,0/pci@1/IntraServer,hme@3,1 as root; init 0 <--: bring system down at the OK prompt: ok nvalias net2 /pci@1f,0/pci@1/IntraServer,hme@3,1 ok setenv use-nvramrc? true ok devalias net2 net2 /pci@1f,0/pci@1/IntraServer,hme@3,1 so i can now do a : boot net2 - install > I just was wondering if this is possible and if so how. > the system has 2 network-cards, if i do a: boot net - install > it will work just fine (jumpstarting the system) and it will use the 'main' > network card, the one build-in on the system board. > > But i would like to be able to boot-net it from the second network card > from some particular reason.. would that be possible? and how do this? -- Kind regards, Luc Suryo _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Sun Nov 3 13:49:59 2002
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:42:57 EST