SUMMARY: luxadm output weirdness

From: <splat_at_4way.us>
Date: Wed Oct 09 2002 - 13:04:40 EDT
Turn out it was a simple solution.  When I reboot the server I did a boot
-r to recreate the devices.  What I failed to do was run "luxadm insert"
and get the new Array info.

Thanks to:

David Foster
Gert-Jan Hagenaar
Deborah Santomauro

and anyone else who will respond after this summary has been sent.




Randy  Romero



--------------Original Post Below----------

% Gurus,
%    Typically in the past I have run the luxadm probe command with results
% similar to this.
% root@luxman:/noc/rw/home/rromero# luxadm probe
% Found Enclosure(s):
% SENA               Name:Lux1   Node WWN:508002000008f9e0
%   Logical Path:/dev/es/ses4
%   Logical Path:/dev/es/ses5
%   Logical Path:/dev/es/ses12
%   Logical Path:/dev/es/ses13
%
% However, I had the backplane on the A5200 showing faulted so I just
% swapped out it out with a good one and put the original disks back in.
% Everything appears to have booted normally and VM isn't complaining, but
% now I get the following type of output when I run the luxadm probe command
%
%
% root@luxman:~# luxadm probe
% No Network Array enclosures found in /dev/es
%
% Found Fibre Channel device(s):
%   Node WWN:20000020379cf72e  Device Type:Disk device
%     Logical Path:/dev/rdsk/c3t0d0s2
%     Logical Path:/dev/rdsk/c5t0d0s2
%   Node WWN:20000004cf9912f1  Device Type:Disk device
%     Logical Path:/dev/rdsk/c3t1d0s2
%     Logical Path:/dev/rdsk/c5t1d0s2
%   Node WWN:20000020379cfc23  Device Type:Disk device
%     Logical Path:/dev/rdsk/c3t2d0s2
% etc etc etc etc
%
%
% Is there something I missed that I should have done when replacing the
% A5200?  This is on an E6500, Solaris 8, VM 3.2
%
%
% TIA,
% Randy Romero
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
Received on Wed Oct 9 13:07:11 2002

This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:42:56 EST