SUMMARY: Not seeing EMC Symmetrix disk from E4500

Hi All,

Thanks to everyone who responded so promptly.

I apologise for not mentioning the disks were SCSI attached.

Below is a message from Ozgur Demir with the solution:

---------------
Did you try before format     drvconfig; disks    command???

Regards,

Ozgur C. Demir

---------------

----- Original Message -----
From: "Alan Bradley - CPX WC" <AlanB@ComparexAfrica.co.za>
To: <sunmanagers@sunmanagers.org>
Sent: Monday, October 07, 2002 5:51 PM
Subject: Not seeing EMC Symmetrix disk from E4500


> Hi All,
>
> I have two E4500 servers (Solaris 2.6) connected to EMC Symmetrix disk.
On
> the one server, I have setup the sd.conf file and I can see the EMC when I
> run format on the server.
>
> On the other server, I have also setup the sd.conf file, but when I run
the
> format command I do not see the EMC disks.  I know the server is seeing
the
> EMC from a "hardware level" as I get "WARNING .... invalid magic number"
> messages when the server is booting.
>
> Has anyone experienced a similar problem and can they please point me in
the
> correct direction?
>
> I will summarize.
>
> Thanks.
>
> Regards,
> Alan Bradley.
> _______________________________________________
> sunmanagers mailing list
> sunmanagers@sunmanagers.org
> http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers