SUMMARY: 120GB IDE HDDs in a SunFire V100

From: Timothy Lorenc <tim_at_load.com>
Date: Thu Sep 05 2002 - 16:23:25 EDT
SUMMARY:

I successfully installed two Western Digital 120GB HDDs in a SunFire V100.

P/N: WD1200JB-00CRA1

NOTE for jumper settings:
I had to set the boot drive c0t0d0 to Cable Select.
And the second drive chained with the CD-ROM drive was set to Master.

Hope this information helps someone else out there.

--
ORIGINAL question below:

I only found a single question about 129GB IDE HDDs with no summary
in the archives.

So I am going to ask: Is it possible to use 120GB IDE HDDs in a
SunFire V100. And if so, which brand(s) or model(s) have you used.

Thanks.


-- LOAD your email!

Timothy Lorenc        USmail:  Lorenc Advantage, Inc.
Consultant                     6732 E. State Blvd.
                               PMB 304
Email: tim@load.com            Fort Wayne, IN 46815
http://www.load.com

***DISCLAIMER***

If this communication concerns the negotiation of a contract or agreement,
the Uniform Electronic Transaction Act does not apply to this communication:
contract and/or agreement formation in this matter shall only occur with
manually-affixed signatures on original documents.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
Received on Thu Sep 5 16:24:49 2002

This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:42:54 EST