SUMMARY :D'not see new logical drive

From: Nick Tchoudinovskikh <>
Date: Mon Sep 02 2002 - 10:07:14 EDT
Thanks to Hindley Nick

try adding the line
name="sd" class="scsi"
    target=0 lun=1;

then boot -r

 >>Hi all!
 >>I have UltraSPARC-IIi-Engine station with IFT RAID controller.On this 
RAID i have 1 logical >>drive.
 >>At addition of the new logic driver, i create new LDR=1 on the RAID 
Controller. I check in >>OpenBoot: ok probe-scsi-all
 >>target 0:
    >> Unit  0                 IFT    .....(my logical drive 0)
   >>   Unit  1                IFT    ......(my  new logical drive 1)
 >>target 3:
    >>   My plextor CDROM
 >>ok boot -r (reconfigure my system)
 >># format
      >>0. c0t0d0 <IFT-3200-0311 cyl 35001 alt 2 hd 64 sec 32>
      >>   /pci@1f,0/pci@1/scsi@1/sd@0,0 (This is my old logical drive)
 >>Specify disk (enter its number):
 >>I do not see my new logic disk.
 >>I tried to do manually (drvconfig, devlinks, disks) - result same. 
That I do not correctly?
sunmanagers mailing list
Received on Mon Sep 2 10:13:04 2002

This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:42:54 EST