Thanks to: Scott Croft Todd Urie Paul Clayton Doug Granzow Tim Chipman Gavin Harris John Riddoch Hutin Bertrand Valeriy Glinskiy Reginald Beavers Art Mast Joe Fletcher Mark Mcmanus Henry Gerard Ltiu Pretty much everyone suggested the following commands: prtconf -v prtdiag -v Some other useful command suggested were: psrinfo -v eeprom iostat swap -l isainfo memconf fbinfo sysdef dmesg Thanks everyone! Jeff ----- Original Message ----- From: "Jeff Claunch" <jclaunch@nccsun2.ncc.ag.gov> To: <sunmanagers@sunmanagers.org> Sent: Friday, August 30, 2002 7:55 AM Subject: Identifying Hardware > Is there a command or a bunch of commands other than Sun's Explorer > application that would enable me to get a list of devices and hardware > attached to a system, including ram, cpu's etc? > > In AIX I can use the lsdev command to get a pretty good idea of what the > system has attached to it fairly easily. > > I will summarize. > > Jeff > _______________________________________________ > sunmanagers mailing list > sunmanagers@sunmanagers.org > http://www.sunmanagers.org/mailman/listinfo/sunmanagers _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Fri Aug 30 16:28:59 2002
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:42:54 EST