SUMMARY: using ndd command to figure out port speed on a gig card ???? UPDATE!!!

I must admit I might have been to quick on posting this summary, eventhought
information
link is providing is helpful is sort of do not answer my question. Here is
the a FINAL SUMMARY:
Special thanks to Hans Schaechl [hans.schaechl@kippdata.de]


"link_speed" is no longer a valid parameter name for
the ce GigaSwift driver.
Instead you can check with netstat -k ce0 (or whatever
your interface number is) and look for "ifspeed".

Also I (Vinnie German) will add that you can look for "link_speed" value
here which will give you the 1000 mark
which I will assume is meaning 1gig speed.

Thanks so much,
Vinnie.




>  -----Original Message-----
> From: 	German, Vinnie  
> Sent:	Tuesday, August 27, 2002 6:01 PM
> To:	'sunmanagers@sunmanagers.org'
> Subject:	SUMMARY: using ndd command to figure out port speed on a gig
> card ????
> 
> 
> Here is the answer to original question posted below:
> 
> http://sundocs.rrze.uni-erlangen.de:8888/ab2/coll.28.25/GIGASWFTDRV/@Ab2Pa
> geView/1288
> 
> 
> Special thanks to the following people:
> 
> 
> 
> Rivera, Angel R [Angel.R.Rivera@conoco.com]
> Galen Johnson [gjohnson@trantor.org]
> John Martinez [john@mtbiker.net]
> Darren Dunham [ddunham@taos.com]
> 
> 
> 
> 
> 
> 	 -----Original Message-----
> 	From: 	German, Vinnie  
> 	Sent:	Tuesday, August 27, 2002 4:24 PM
> 	To:	sunmanagers@sunmanagers.org
> 	Subject:	using ndd command to figure out port speed on a gig
> card ????
> 
> 	Hello:
> 
> 	I'm familiar with using ndd command to figure out connection speed
> on 
> 	a machine which is using the le0 port of hme port of qfe port.
> 
> 	I just built a machine using a Gig network card and its port name if
> 
> 	ce0 so I need it to see the speed on this port and I typed in the
> following:
> 
> 	ndd -get /dev/ce link_speed 
> 
> 	and instead of getting a "0" or a "1" which you will usually get if
> using a hme
> 	port, I'm getting the following:
> 	     
> 	operation failed, Invalid argument
> 
> 	How do I figure out at which speed this port is connected to using
> the "nnd" command.
> 
> 	Thanks very much,
> 	Vinnie.
> 
> 
-----  This message is for the named person's use only. It may contain
confidential, proprietary or legally privileged information. No
confidentiality or privilege is waived or lost by any mistransmission. If
you receive this message in error, please delete it and all copies from your
system, destroy any hard copies and notify the sender. You must not,
directly or indirectly, use, disclose, distribute, print, or copy any part
of this message if you are not the intended recipient. Nomura Holding
America Inc., Nomura Securities International, Inc, and their respective
subsidiaries each reserve the right to monitor all e-mail communications
through its networks. Any views expressed in this message are those of the
individual sender, except where the message states otherwise and the sender
is authorized to state the views of such entity. Unless otherwise stated,
any pricing information in this message is indicative only, is subject to
change and does not constitute an offer to deal at any price quoted. Any
reference to the terms of executed transactions should be treated as
preliminary only and subject to our formal written confirmation.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers