Thanks to the following folks for sending feedback: From: Scott Howard <scott@doc.net.au> From: David Foster <foster@dim.ucsd.edu> From: Fiamingo, Frank <FiamingF@strsoh.org> From: Casper Dik <Casper.Dik@Sun.COM> From: Baranyai Pal <bp@hszk.bme.hu> I did check the patch README file but was a little confused by it. The original question is at the end of this file. Martin Meadows > > > >Patch 106787-18 is for SNMP version 1.0.3 ONLY. Odds are you have > >an older version installed. You'll need to download the new version > >(it's on the SUn website somewhere), pkgrm the version you currently > >have installed and then pkgadd the new version. Once you've done this > >you should be able to apply the patch > > > >patchadd checks not only that you have the correct packages, but also > >that you have the correct versions of those packages. > > -------------------------------------------------------------------------- Did you check the patch README? According to it this patch requires package SUNWsasdk. -------------------------------------------------------------------------- Make sure that "Solstice Enterprise Agents 1.0.3" is installed. The patch failed for me also, and then I installed (re-installed?) v1.0.3. After that the patch installed without a hitch. -------------------------------------------------------------------------- You apparently need to download a newer version of the snmp agents from some place and then patch it. -------------------------------------------------------------------------- >From README: Special Install Instructions: ----------------------------- IMPORTANT: This patch is not compatible with SDK agents built prior to patch 106956-03. These agents must be recompiled using mibcodegen from patch 106956-03 or greater. This patch is for SEA version 1.0.3 See SEA web page, if you need to add toolkit sdk (SUNWsasdk package) http://www.sun.com/solstice/products/ent.agents -------------------------------------------------------------------------- And here's the original question: I never saw any answers to the following post and I never saw a summary. I'm experiencing the same problem with patch 106787-18 for Solaris 2.6. Can anyone help? Thanks! Martin Meadows >Date: Thu, 20 Jun 2002 19:15:09 -0400 > >Hi, > >I've a Ultra 60 box running Solaris 2.6. This system >is our HP Openview management platform. I've been >trying to roll in the SNMP security patch recently >released, 106787-18 for 2.6. The patch fails to >install with the error code indicating missing packages >for the patch. All required packages are in fact >installed(SUNWmibii,SUNWsacom,SUNWsadmi,SUNWsasnm). >I've tried the latest release of patchadd which came >with one of the patches in the security and recommended >patch set. Still no luck. We've shut the management >station down until we can get this patched because >this port is reachable from public IP space. > >Any advice welcome. Thanks, TW _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Wed Jul 10 17:15:50 2002
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:42:48 EST