RE: L1-A key for NetraX1Hi folks, A "Control-Break" works for Hyperterminal. -Ed -----Original Message----- From: Francisco Puente (CEA) [mailto:francisco.puente@cea.ericsson.se] Sent: Thursday, May 23, 2002 10:05 AM To: Ed Sanborn Subject: RE: L1-A key for NetraX1 Hi, i think you cannot break down the system from Hiperterminal, you should try TeraTerm, from wich you can send a "Control-Break" at ANY time, getting the ok prompt! I hope this help! Francisco Puente ERICSSON Francisco Puente Jambala Deployment Engineer Network Integration Center Compaqma Ericsson S.A.C.I. * Av. Eduardo Madero 1020- Piso 17 C1106 ACX - Buenos Aires - ARGENTINA * Phone + 54 11 4319-5676 * Fax + 54 11 4316-0996 * e-mail: mailto:francisco.puente@cea.ericsson.se -----Original Message----- From: Ed Sanborn [mailto:esanborn@snowshore.com] Sent: Thursday, May 23, 2002 11:05 AM To: sunmanagers@sunmanagers.org Subject: L1-A key for NetraX1 Hi folks, I have a PC with Hyperterminal hooked up to my LOM console port on my NetraX1. When I apply power the system begins to boot. I would like to be able to break into the PROM monitor (the "OK" prompt). Normally on a Sun keyboard you can hit the L1-A keys. Any idea what the equivalent is from Hyperterminal? Thanks, Ed Ed Sanborn (978) 367-8478 Principal Network Administrator SnowShore Networks 285 Billerica Rd. Chelmsford, MA. 01824 _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Thu May 23 11:22:24 2002
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:42:44 EST