SUMMARY:Solaris 7:E450:Raid Manager 6.22:A1000

From: mr ayie <>
Date: Fri Mar 22 2002 - 05:01:14 EST
hi managers..

thanks to:
German, Vinie
Mike Salehi
*suggested hardware problem

Steve Hunt
*suggestion off abit but thank for your info

the answer is that the controller for that A1000 is corrupted. after i 
change the controller using recovery guru all system look fine. but now the 
problem is the raid manager app see A1000 as c2t3d0 but when i format it 
show c4t3d0. in the vfstab i used c4t3d0.

thanks for all help..

original msg....

hi managers

i have a problem with my system. e450 running solaris 7 attach to A1000 with
raid manager 6.22. before this all system running fine but after sometime
(maybe after blackout accurs) my system cannot mount all hdisks in A1000 to

A1000 consists of 4 disk RAID 0. c2t3d0sx with 4 LUN.

i run probe-scsi-all and all attached device appears but not my A1000.
error appears --> pci@1f,2000/scsi@1
         Fatal SCSI error at script address 258
         Unexpected disconnect.

when i boot up
WARNING: /pci@1f,2000/scsi@1(glm2)
Unexpected DMA state:WAIT .dstat=a0>DMA-FIFO-empty,bus-fault>
WARNING: /pci@1f,2000/scsi@1(glm2)
Disconnected command timeout for Target 3.0
this messages repeat for Target 3.2,3.4,3.6

after boot up i try to run /usr/lib/osa/bin/rm6 the same error appears.. it
accurs each time i click icon status & configuration & the screen need to be

when it manage to show the configuration menu all existing config was not
there. . i run healthchk --> result is data path failure

format command only show internal disk (take some time to show result)

is my controller card corrupted? or is there any other thing that i have to
look for.


Send and receive Hotmail on your mobile device:
sunmanagers mailing list
Received on Fri Mar 22 04:13:32 2002

This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:42:37 EST