Original question: E6500/Solaris8, JNI cards -> Brocade switch -> EMC Symmetrix Update sd.conf with additional disks, execute devfsadm/disks/devlinks Can't see new devices...why?? Many thanks to all who replied, most, if not all, correctly: Additionally, a great suggestion is to be proactive and list additional devices prior to actual installation in sd.conf. This way a reboot can be avoided. Steve Mickeler Richard Place Chris Price Angel Alejandro Vega Soto Martin Baldenegro Nelson Caparroso Mike Marcell Steve Sandau Bobby Ramirez Mark Scarborough Ravi Channavajhala Answer: You'll have to reboot because you added your sd.conf entries while it is up. What we've done so we avoid reboots is open up our sd.conf to all possible target - lun combinations to make possible on-line disk additions/configurations (max out your LUNS per possible taerget to 255 in each server's sd.conf and reboot). Buddy DeMontier State Street Global Advisors Infrastructure Technical Services 2 International Place Boston Ma 02110 617-664-6141 _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Thu Feb 28 07:44:33 2002
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:42:35 EST