Thanks for Lennon Padraig, Steven Mickeler and David Evans for your quick response. the problem is related inappropriate TERM setting To use Ctrl-J instead of Enter key at login stage then setenv TERM=vt100 or export TERM=vt100 or use reset command it is back to normal below is my previous question. I try to telnet a Solaris system from a linux box. the screen shows up " login: " prompt as usual but when I type username and press Enter key, the curson goes back to the first character on this line which is "l" and doesn't respond any more. I finally figure out to use Ctrl + Enter Key combination as simply Enter key. then screen shows login: aaa password: after inputting password, it can access. but initial even a simply command like "ls", the output shows on several irregular lines. I guess it might be related to getty setting with carriage-return or baud rate. but don't know exactly how to configure. Please share you ideas. thanks Daniel _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Mon Feb 4 13:18:14 2002
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:42:33 EST