SUMMARY: prtdiag output error.

From: Randy Romero <splat_at_fury.to>
Date: Fri Nov 30 2001 - 10:43:26 EST
Thanks to Rahulkumar Patel with his solution.

Solution:
use following command
prtconf -V
OBP 4.0.4 2001/03/22 15:42

I had several suggestions to doing a stop A, .version then go.  But no one
seemed to know the impact of doing this.  Ya gotta love this list!!


Original Post:
> Gurus,
>   I attempt to do a prtdiag -v on an Ultra10 and get the following error.
>
>
>
> # ./prtdiag -v
> System Configuration:  Sun Microsystems  sun4u Sun Ultra 5/10 UPA/PCI
> (UltraSPARC-IIi 270MHz)
> System clock frequency: 90 MHz
> Memory size: 256 Megabytes
>        CPU Units: Frequency Cache-Size Version
>             A: MHz  MB  Impl. Mask  B: MHz  MB  Impl. Mask
>             ----------  ----- ----  ----------  ----- ----
>                270 0.2   12    1.3
> ======================IO Cards=========================================
> dev_find_node() Could not find any IO bus
>
>
>
>
> Unfortunately, I need to get the opb version and this is stopping well
> short of that info.  I can't take this machine down to do a .version from
> the ok prompt. Can I get the OPB version any other way?  The man page on
> eeprom does not indicate I can use it, so I'm hoping someone can give me a
> workaround.  Thanks in advance.  Will Summerize.
>
>
> Randy Romero
> _______________________________________________
> sunmanagers mailing list
> sunmanagers@sunmanagers.org
> http://www.sunmanagers.org/mailman/listinfo/sunmanagers
>
Received on Fri Nov 30 15:43:26 2001

This archive was generated by hypermail 2.1.8 : Wed Mar 23 2016 - 16:32:36 EDT