SUMMARY: Netra t1 Returns to Ok Prompt

From: Tony Fitzgerald <tony.fitzgerald_at_trintech.com>
Date: Fri Aug 17 2001 - 04:16:13 EDT
There were two main suggestions:

1 enter a line into /etc/system set abort_enable=0
2 Have the laptop powered up with hypercom running and then
connect/disconnect the cable. This option would work just fine if I could
rely on NT staying up. So I have chosen the first option (and it works).
Which I'm told is not necessarily the best, as it prevents you from being
able to send a genuine break signal.

Thanks to all that responded. You'll be sure to hear from me soon!

Tony

Original Message:
Hi all,

I've just subscribed to this list and would like to ask my first question.

I've been appointed administrator of the above box... and am having a
problem with it returning to the ok prompt. I am connected to it via serial
port A, with a null modem cable, into an NT laptop. I'm using Hyperterm.
When I disconnect the cable, powercycle my laptop or it crashes (the latter
is normally the case), it returns to the ok prompt.

I've tried "set abort_enable=3D0=20" which was suggested on another list but
upon reboot, I'm told it ignores anything from /etc/system D0 onwards.

I haven't had much exposure to UNIX/Solaris7 (which is what I have
installed), so I guess it's going to be a very steep learning curve!

Any suggestions would be appreciated.

Tony
Received on Fri Aug 17 09:16:13 2001

This archive was generated by hypermail 2.1.8 : Wed Mar 23 2016 - 16:25:01 EDT