Hi,
Thanks everyone for the responses.
Here is the summary:-
Siddhartha
---------------------------------
Hi,
I am trying to install Solaris 5.7 on a Sun E220R (UltraSparc 450 with 2 GB
RAM and one SCSI disk). The installation aborts and the system comes to the
OK prompt with the following error :-
"Fast Data Access MMU Miss"
Please help with this.
ALso what extra debugging ingormation like CPU register info. or state is
required to debug this problem?
Siddhartha
---------------------------------------------
you didn't say what rev Solaris 7 you are using. You may need the latest
build, 11/99. Check your Sun FE manual for compatibility.
Rgds,
Bill
-----------------------------------------------
use the 12/99 CD
--------------------------------------------------
Did you remember to first boot off of the "Operating Environment CD"
that was packed with the E220?
Frank
---------------------------------------------------
You need to boot first from the Environment CD that came with
the machine, not the normal Solaris 7 CD.
-----------------------------------------------------------------
Found this with a quick Google search.
http://ume.med.ucalgary.ca/usenet/Solaris/0526.html
-----------------------------------------------------------------
Which Solaris 7? You probably need at least 5/99 for the required
hardware support.
--------------------------------------------------------------
_____________________________________________________________________
Message sent using: NetMagic WebMail http://www.netmagicsolutions.com
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:14:24 CDT